Digilock Numeris Versa Mini 제품 설명서 - 페이지 4

{카테고리_이름} Digilock Numeris Versa Mini에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Digilock Numeris Versa Mini 11 페이지. Touch rfid
Digilock Numeris Versa Mini에 대해서도 마찬가지입니다: 매뉴얼 (18 페이지), 제품 설명서 (11 페이지)

페이지 인쇄
Digilock Numeris Versa Mini 제품 설명서
Programming Instructions

Set Lock Functionality

Each lock can be set for either shared or assigned use functionality. Press = to check functionality. If in shared use, LED is red. If in
assigned use, LED is green.
1
To set for assigned use:
Press
=` 65 `
.
The red LED will turn on.

Programming Instructions - In Shared Use Functionality

Auto Unlock

When in shared use functionality, each lock can be programmed to auto unlock after a set number of hours. The default setting is OFF
(does not auto unlock).
1a

To turn on Auto Unlock:

Press
=` 95 `
.
The LED will fl ash.
While the LED is fl ashing, insert the Programming Key.
A two-tone beep will be heard and the LED will turn on.
1
To turn off Auto Unlock:
Press
=` 94 `.
The LED will fl ash.
4
Product Guide
2
Insert the Programming Key.
A two-tone beep will be heard
and the green LED will fl ash once.
1b
Keypad
Shared & Assigned Use Functionality
1
To set for shared use:
Press
=` 56 `
.
The green LED will turn on.
2
While the LED is on, enter the number of hours from
then press
`
.
Two sets of two-tone beeps will be heard and the LED will turn off.
For example:
Press 8 ` to set the lock to auto unlock 8 hours after locking.
2
While the LED is fl ashing, insert the Programming Key.
A two-tone beep will be heard and the LED will turn off.
2
Insert the Programming Key.
A two-tone beep will be heard
and the red LED will fl ash once.
1 - 9 9