- ページ 2

スクラバー Crescent SC250のPDF トラブルシューティングマニュアルをオンラインで閲覧またはダウンロードできます。Crescent SC250 2 ページ。
Crescent SC250 にも：トラブルシューティングマニュアル (2 ページ)

ATTENTION! Do not use the machine before you have read and understood the Instructions for use manual

The machine

doesn't work

as it should?

The suction

doesn't work

as it should?

The machine

doesn't clean

as it should?

The brushes

don't work as

they should?

1. Check if the battery is charged.

1. Check if the recovery tank is full.

Clean it if needed.

1. Adjust the brush pressure by

turning the regulation knob.

2. Check if the battery co

slot. (*)

2. Check if dirt/debris are clogging the

squeegee inlet and if the blades are

worn or damaged.

3. Check if the holes in solution

dispensers are clogged. Remove

them and clean if needed.

2. Check the correct installation and

the wear of the cylindrical brush.

3. Machine fault indicated by Led's

blinking. (*)

3. Rinse the inside of the duct

recovery hose with water.

3. Check if quick connect valve is not

leaking.

3. Check if there are external

materials avoiding brush rotating.

www.crescentindustrial.co.uk

SC250

(*) For these causes the maintenance

procedure must be performed by an

For further information refer to the

Service Manual, available at any