Crescent SC250 문제 해결 매뉴얼 - 페이지 2
{카테고리_이름} Crescent SC250에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Crescent SC250 2 페이지.
Crescent SC250에 대해서도 마찬가지입니다: 문제 해결 매뉴얼 (2 페이지)
페이지 인쇄ATTENTION! Do not use the machine before you have read and understood the Instructions for use manual
The machine
doesn't work
as it should?
The suction
doesn't work
as it should?
The machine
doesn't clean
as it should?
The brushes
don't work as
they should?
1. Check if the battery is charged.
1. Check if the recovery tank is full.
1.
Clean it if needed.
1. Adjust the brush pressure by
turning the regulation knob.
2. Check if the battery co
slot. (*)
2. Check if dirt/debris are clogging the
squeegee inlet and if the blades are
worn or damaged.
3. Check if the holes in solution
dispensers are clogged. Remove
them and clean if needed.
2. Check the correct installation and
the wear of the cylindrical brush.
3. Machine fault indicated by Led's
blinking. (*)
3. Rinse the inside of the duct
recovery hose with water.
3. Check if quick connect valve is not
leaking.
3. Check if there are external
materials avoiding brush rotating.
www.crescentindustrial.co.uk
SC250
(*) For these causes the maintenance
procedure must be performed by an
For further information refer to the
Service Manual, available at any
4.