- ページ 2

アンプ Accusound AMA-1のPDF ハンドブックをオンラインで閲覧またはダウンロードできます。Accusound AMA-1 8 ページ。 Acoustic amplifier
Accusound AMA-1 にも：ハンドブック (8 ページ)

Description;

The Accusound AMA-1 acoustic amplifier is a professional quality, flexible product.

The amplifier is intended to be used with microphones or pickups with an XLR or

1/4" jack plug connector. Phantom power may be switched on and off using a front

panel button. Similarly the input sensitivity may be changed using a front panel

button, allowing use of many different instrument pickup or CD players.

The front panel also allows independent volume control along with overall system

volume. Three band tone control is available on each channel plus a parametric

control to allow selective enhancement or reduction of a particular frequency.

There are 16 different reverberation programs available. Both channels must use

the same reverberation channel, however the level of reverberation may be

adjusted on each channel independently from none to max.

If this is insufficient, external effects may be added by use of the send and return

sockets on the amplifier.

There is also a headphone socket with independent volume control to allow

personal listening or monitoring.

The DI output is selectable between pre and post main volume control so a clean

signal may be sent to your main amplification system if you are using the AMA-1 for

monitoring.

There are clipping indicators on each input, plus the output, to indicate when you

are approaching the overload limit of the amplifier. (Green indicates good signal

level, Red indicates close to clipping level, no LED illumination indicates a very low

input level.)

172 Wadsley Lane, Sheffield, UK. S6 4EE +44 (0)114 220 3517