- ページ 22

スイッチ Cisco 3020 - Cisco Catalyst Blade SwitchのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 3020 - Cisco Catalyst Blade Switch 31 ページ。 Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Cisco 3020 - Cisco Catalyst Blade Switch にも：スタートマニュアル (37 ページ), クイックスペック (12 ページ), リリースノート (41 ページ), リリースノート (27 ページ), リリースノート (23 ページ), リリースノート (21 ページ), インストレーション・マニュアル (21 ページ)

Configure the PC terminal emulation software for:

Step 3

– 9600 baud

– 8 data bits

– No parity

– 1 stop bit

– No flow control

Step 4

Use the CLI to enter commands to configure the switch module. See the software

configuration guide and the command reference for more information.

Using the Onboard Administrator CLI

See the HP BladeSystem enclosure setup and installation guide at

http://www.hp.com/go/bladesystem/documentation

Administration CLI.

Other Management Options

You can use SNMP management applications such as CiscoWorks Small Network Management

Solution (SNMS) to configure and manage the switch module. You also can manage it from an

SNMP-compatible workstation that is running platforms such as HP OpenView or SunNet Manager.

The Cisco IE2100 Series Configuration Registrar is a network management device that works with

embedded Cisco Networking Services (CNS) agents in the switch module software. You can use

IE2100 to automate initial configurations and configuration updates on the switch module.

See the "Accessing Help Online" section on page 28 for a list of supporting documentation.

for information on how to use the Onboard