Cisco 3020 - Cisco Catalyst Blade Switch Panduan Memulai - Halaman 22

Jelajahi secara online atau unduh pdf Panduan Memulai untuk Beralih Cisco 3020 - Cisco Catalyst Blade Switch. Cisco 3020 - Cisco Catalyst Blade Switch 31 halaman. Release notes for the cisco catalyst blade switch 3020 for hp, ciscoã‚â iosã‚â releaseã‚â 12.2(44)se
Juga untuk Cisco 3020 - Cisco Catalyst Blade Switch: Panduan Memulai (37 halaman), Quickspecs (12 halaman), Catatan Rilis (41 halaman), Catatan Rilis (27 halaman), Catatan Rilis (23 halaman), Catatan Rilis (21 halaman), Panduan Instalasi (21 halaman)

Halaman Cetak
Cisco 3020 - Cisco Catalyst Blade Switch Panduan Memulai
Configure the PC terminal emulation software for:
Step 3
– 9600 baud
– 8 data bits
– No parity
– 1 stop bit
– No flow control
Step 4
Use the CLI to enter commands to configure the switch module. See the software
configuration guide and the command reference for more information.
Using the Onboard Administrator CLI
See the HP BladeSystem enclosure setup and installation guide at
http://www.hp.com/go/bladesystem/documentation
Administration CLI.

Other Management Options

You can use SNMP management applications such as CiscoWorks Small Network Management
Solution (SNMS) to configure and manage the switch module. You also can manage it from an
SNMP-compatible workstation that is running platforms such as HP OpenView or SunNet Manager.
The Cisco IE2100 Series Configuration Registrar is a network management device that works with
embedded Cisco Networking Services (CNS) agents in the switch module software. You can use
IE2100 to automate initial configurations and configuration updates on the switch module.
See the "Accessing Help Online" section on page 28 for a list of supporting documentation.
22
for information on how to use the Onboard