- ページ 2

スイッチ Cisco 3750 - Catalyst EMI SwitchのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 3750 - Catalyst EMI Switch 33 ページ。 Catalyst 3750 series switches
Cisco 3750 - Catalyst EMI Switch にも：データシート (18 ページ), インストールマニュアル (47 ページ), よくある質問 (10 ページ), 製品情報 (5 ページ), 製品サポート速報 (6 ページ), 製品概要 (25 ページ), 説明 (1 ページ), データシート (23 ページ), 製品サポート速報 (6 ページ), スタートマニュアル (27 ページ), データシート (23 ページ)

About this Guide

This guide provides instructions on how to use Express Setup to initially configure your Catalyst

switch. Also covered are switch management options, basic rack-mounting procedures, stacking

procedures, port and module connection procedures, power connection procedures, and

troubleshooting help.

For additional installation and configuration information for Catalyst 3750 switches, see the Catalyst

3750 documentation on Cisco.com. For system requirements, important notes, limitations, open and

resolved bugs, and last-minute documentation updates, see the release notes, also on Cisco.com.

When using the online publications, refer to the documents that match the Cisco IOS software version

running on the switch. The software version is on the Cisco IOS label on the switch rear panel.

You can order printed copies of the manuals from the Cisco.com sites and from the telephone numbers

listed in the "Obtaining Documentation" section on page 24.

For translations of the warnings that appear in this publication, see the Regulatory Compliance and

Safety Information for the Catalyst 3750 Switch that accompanies this guide.

Follow these steps:

1. Unpack and remove the switch and the accessory kit from the shipping box.

2. Return the packing material to the shipping container, and save it for future use.

3. Verify that you have received the items shown on page 3. If any item is missing or damaged,

contact your Cisco representative or reseller for instructions. Some switch models might include

additional items that are not shown on page 3.

If you do not specify the length of the StackWise cable, the 0.5-meter cable is supplied.

Note

You need to supply this equipment to run Express Setup:

• PC

• Ethernet (Category 5) straight-through cable (as shown)