- ページ 2

計測機器 Accusplit EAGLE AE190XLGMのPDF 操作説明をオンラインで閲覧またはダウンロードできます。Accusplit EAGLE AE190XLGM 2 ページ。 Certified accurate pedometer

ページを印刷する

BACK

CHOOSING GOALS

This unit can store your personal goals for steps, activity time,

distance and calories during step activity. The default values

are 3,500 steps, 30 minutes of activity time, 1 mile/km, and

100 calories. Choose goals to fit your current activity level.

GOAL TRACKING

When viewing Steps and other measures, you will see the

results in the display, and also the percentage progress

towards your Goal on the bottom of the display, shown

as a series of 20 small bars appearing on the bottom of

the display, with each bar representing 5% of the total.

TOTAL vs. TRIP MEMORIES

The TRIP memories are displayed in normal operating mode,

and can be reset whenever you want, just like the Trip

odometer on cars.

The TOTAL Memories keep track of your progress over a long

period of time. You may wish to reset your total memories

once per week, per month, per year, or never! It can be fun

to see how many steps or how much distance you walk in

a long period of time.

As steps are taken, the pedometer increases the step count

for both Trip and Total memories simultaneously. Activity Time,

Distance and Calories are counted automatically whenever

steps are being counted.

Press the MEMORY button ("M") to display TOTAL memories.

The "T" icon for "TOTAL" disappears when displaying TRIP

memory values. In Total Step Memory, the unit displays

Steps ÷ 1,000, so that up to 10,000,000 steps is shown as 9999.9.

Activity Time is displayed in Hours, up to 100,000 as 99999.

Distance is displayed in Miles or Km, up to 100,000 as 99999.

Calories are displayed in kcal, up to 100,000 as 99999.

Mode

indicator

IGI

ALKER

.COM

STEP TIME

DIST CAL

Goal

Display

190

JW200

S3-

S1,S2,S4

RESET Button

SETTING PROCEDURE

ACCUSPLIT products use a common setting procedure

known as "S1- S2-S3-S4." Here's how it works:

Press S1 for 2 seconds: Enter the SET mode

Press S2: Change the field to be set

Press S3: Change the field value

Press S4 for 2 seconds: Exit the SET mode

You can enter and exit Set mode from any of the regular

display screens. Once in Set mode, you can cycle through

all of these settings by Pressing S2 repeatedly.

We recommend that you adjust the settings all at once,

using the following procedure.

148 mm x 210 mm

Mode

indicator

Goal

Display

Entering Set Mode and Setting Goals and Stride Length

and Weight

1. Repeatedly Press the MODE button until the display

shows a line underneath the word on the label repre-

senting the function Goal you want to set.

2. Press and Hold the S1 button for 2 seconds. The current

goal display will start to flash, showing that you've

entered SET mode. You'll also notice the "G" indicator

has come on, indicating that you are ready to set your

Goal.

3. Press the S3+ button to increase the Goal value.

Press the S3– button to decrease the Goal value.

Hold the buttons down to change values quickly.

4. Press the S2 button to select the next setting: Step Goal,

Activity Time Goal, Distance Goal, Stride Length,

Calorie Goal, Weight, Clock Hours, Minutes and Seconds.

Exiting Set Mode

Press and Hold the S4 button for 2 seconds. The unit will

exit setting mode – no values will be flashing anymore.

Note: The unit will save any changes and exit set mode

after 30 seconds unattended.

CHANGING STEP FILTER SETTING and UNITS OF MEASURE

While the JW200 PedometerEngine™ Step Sensor is

Steps

the benchmark for accuracy, some people like to have

Counted

the ability to fine tune a filter. Therefore, the unit has

a variable setting step filter, to allow fine-tuning to your

specific preferences. You can set the value to any value

GOAL

from 0–5 steps. For example, if the filter is set to "3",

MEMORY

the unit will wait to start counting steps until more than

100%

three steps have been taken in less than five seconds.

MODE

Button

Your pedometer can compute and display results in English

S3+

(default) or Metric units of measure.

MEMORY

Button

Press and Hold S1 for over 4 seconds to Enter the Deep

SET Mode. The display will show a flashing step filter

value between 0 and 5.

Press S3+ or S3– to change the step filter setting.

Press S2. The display will show a flashing "US" or "EU"

representing English or Metric unit of measure.

Press S3+ to change from one to the other.

Press and Hold S4 for 2 seconds to exit Deep Set Mode.

Note: The unit will save any changes and exit set mode

after 30 seconds unattended.

Steps

Counted

IGI

ALKER

.COM

STEP TIME

DIST CAL

GOAL

MEMORY

100%

190

JW200

S3-

S1,S2,S4

S3+

S1,S2,S4

S3– Button

Button

For comprehensive instructions including

instructional videos, registration,

warranty details, go to

www.accusplit.com/support

or scan QR code.

S3+

Button