Accusplit EAGLE AE190XLGM Instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Przyrządy pomiarowe Accusplit EAGLE AE190XLGM. Accusplit EAGLE AE190XLGM 2 stron. Certified accurate pedometer
Drukuj stronę
BACK
BACK
CHOOSING GOALS
This unit can store your personal goals for steps, activity time,
distance and calories during step activity. The default values
are 3,500 steps, 30 minutes of activity time, 1 mile/km, and
100 calories. Choose goals to fit your current activity level.
GOAL TRACKING
When viewing Steps and other measures, you will see the
results in the display, and also the percentage progress
towards your Goal on the bottom of the display, shown
as a series of 20 small bars appearing on the bottom of
the display, with each bar representing 5% of the total.
TOTAL vs. TRIP MEMORIES
The TRIP memories are displayed in normal operating mode,
and can be reset whenever you want, just like the Trip
odometer on cars.
The TOTAL Memories keep track of your progress over a long
period of time. You may wish to reset your total memories
once per week, per month, per year, or never! It can be fun
to see how many steps or how much distance you walk in
a long period of time.
As steps are taken, the pedometer increases the step count
for both Trip and Total memories simultaneously. Activity Time,
Distance and Calories are counted automatically whenever
steps are being counted.
Press the MEMORY button ("M") to display TOTAL memories.
The "T" icon for "TOTAL" disappears when displaying TRIP
memory values. In Total Step Memory, the unit displays
Steps ÷ 1,000, so that up to 10,000,000 steps is shown as 9999.9.
Activity Time is displayed in Hours, up to 100,000 as 99999.
Distance is displayed in Miles or Km, up to 100,000 as 99999.
Calories are displayed in kcal, up to 100,000 as 99999.
Mode
indicator
-
D
W
XL
IGI
ALKER
.COM
STEP TIME
DIST CAL
Goal
Display
0
20
40
60
80
XL
190
GM
JW200
S3-
S1,S2,S4
RESET Button
SETTING PROCEDURE
ACCUSPLIT products use a common setting procedure
known as "S1- S2-S3-S4." Here's how it works:
Press S1 for 2 seconds: Enter the SET mode
Press S2: Change the field to be set
Press S3: Change the field value
Press S4 for 2 seconds: Exit the SET mode
You can enter and exit Set mode from any of the regular
display screens. Once in Set mode, you can cycle through
all of these settings by Pressing S2 repeatedly.
We recommend that you adjust the settings all at once,
using the following procedure.
148 mm x 210 mm
148 mm x 210 mm
Mode
indicator
Goal
Display
Entering Set Mode and Setting Goals and Stride Length
and Weight
1. Repeatedly Press the MODE button until the display
shows a line underneath the word on the label repre-
senting the function Goal you want to set.
2. Press and Hold the S1 button for 2 seconds. The current
goal display will start to flash, showing that you've
entered SET mode. You'll also notice the "G" indicator
has come on, indicating that you are ready to set your
Goal.
3. Press the S3+ button to increase the Goal value.
Press the S3– button to decrease the Goal value.
Hold the buttons down to change values quickly.
4. Press the S2 button to select the next setting: Step Goal,
Activity Time Goal, Distance Goal, Stride Length,
Calorie Goal, Weight, Clock Hours, Minutes and Seconds.
Exiting Set Mode
Press and Hold the S4 button for 2 seconds. The unit will
exit setting mode – no values will be flashing anymore.
Note: The unit will save any changes and exit set mode
after 30 seconds unattended.
CHANGING STEP FILTER SETTING and UNITS OF MEASURE
While the JW200 PedometerEngine™ Step Sensor is
Steps
the benchmark for accuracy, some people like to have
Counted
the ability to fine tune a filter. Therefore, the unit has
a variable setting step filter, to allow fine-tuning to your
specific preferences. You can set the value to any value
MY
GOAL
from 0–5 steps. For example, if the filter is set to "3",
MEMORY
the unit will wait to start counting steps until more than
100%
three steps have been taken in less than five seconds.
MODE
Button
Your pedometer can compute and display results in English
S3+
(default) or Metric units of measure.
MEMORY
Button
Press and Hold S1 for over 4 seconds to Enter the Deep
SET Mode. The display will show a flashing step filter
value between 0 and 5.
Press S3+ or S3– to change the step filter setting.
Press S2. The display will show a flashing "US" or "EU"
representing English or Metric unit of measure.
Press S3+ to change from one to the other.
Press and Hold S4 for 2 seconds to exit Deep Set Mode.
Note: The unit will save any changes and exit set mode
after 30 seconds unattended.
Steps
Counted
-
D
W
XL
IGI
ALKER
.COM
STEP TIME
DIST CAL
MY
MY
GOAL
MEMORY
MEMORY
0
20
40
60
80
100%
XL
GM
190
JW200
S3-
S1,S2,S4
S3+
S1,S2,S4
S3– Button
Button
For comprehensive instructions including
instructional videos, registration,
warranty details, go to
www.accusplit.com/support
or scan QR code.
S3+
Button