スイッチ Cisco ASR 920 seriesのPDF 設置マニュアルをオンラインで閲覧またはダウンロードできます。Cisco ASR 920 series 42 ページ。 Aggregation services router
Cisco ASR 920 series にも： 設置マニュアル (36 ページ), はじめに (6 ページ), ハードウェア・インストール・マニュアル (46 ページ), マニュアル (36 ページ)
ページを印刷する
Installing the Cisco ASR 920 Series Router
This chapter describes how to install the Cisco ASR 920 Series Router and includes the following sections:
•
•
•
•
•
•
•
•
•
•
Prerequisites
Before installing the Cisco ASR 920 Series Router, it is important to prepare for the installation by:
• Preparing the site (site planning) and reviewing the installation plans or method of procedures (MOP).
• Unpacking and inspecting the Cisco ASR 920 Series Router. See "Receiving the Cisco ASR 920 Series
• Gathering the tools and test equipment required to properly install the Cisco ASR 920 Series Router.
For more instructions on how to prepare for the installation of the Cisco ASR 920 Series Router, see Chapter
2, "Preparing for Installation."
Prerequisites, page 1
Installing the Router in a Rack, page 2
Install the AC Power Cables, page 14
Install the DC Power Supply, page 16
Install and Remove SFP Modules, page 19
Connect to the 10/100/1000 Ports, page 23
Power Connection Guidelines, page 28
Connect the Chassis to the Network, page 31
See "Site Planning" section on page 2-9 .
Router" section on page 2-20 .
See "Tools and Equipment" section on page 2-21 .
Cisco ASR 920 Series Aggregation Services Router Hardware Installation Guide
1