- ページ 16

スイッチ Cisco ASR 920 seriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco ASR 920 series 36 ページ。 Aggregation services router
Cisco ASR 920 series にも：設置マニュアル (36 ページ), はじめに (6 ページ), 設置マニュアル (42 ページ), ハードウェア・インストール・マニュアル (46 ページ)

Power on the Device

Figure 16: Attaching the DC Power Supply

Step 3

Close the DC power supply guard.

Power on the Device

After the device is mounted, perform these tasks to complete the installation:

• Power on the device.

• Connect the front-panel ports.

Connect SFP Modules

Before you begin this task, ensure that you have read and understood the safety warnings in the Safety

Precautions for Module Installation and Removal section of the Safety Warnings chapter.

Use only Cisco SFP modules on a Cisco device. Each SFP module has an internal serial EEPROM that is

encoded with security information. This encoding provides a way for Cisco to identify and validate that the

SFP modules meet the requirements of the device.

Caution

We recommend that you wait for 30 seconds between the removal and insertion of an SFP module from the

device. The wait period allows the transceiver software to initialize and synchronize with the device. Changing

an SFP before this wait period could result in transceiver initialization issues that disable the SFP.

Installing the Cisco ASR 920 Series Router