- ページ 13

ネットワーク・ルーター Digisol DG-GR6010のPDF クイック・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Digisol DG-GR6010 17 ページ。 Xpon onu router with 1 pon and 1 giga port
Digisol DG-GR6010 にも： クイック・インストール・マニュアル (20 ページ)

ページを印刷する
Digisol DG-GR6010 クイック・インストール・マニュアル

Troubleshooting

1. After power on, all the LEDs are lit?

Reasons:
1) Power connection errors.
2) Power is not normal.
Solution:
1) Check that the power cable is connected.
2) The rear panel of the power supply is turned on.

2. LINK / ACT LED does not turn on?

Reasons:
1) Network cable is damaged or loose connection.
2) Cable type error.
3) Long lines outside the allowable range.
Solution:
1) Replace the network cable, and pay attention to the standard
Ethernet cable must be parallel or crossing lines.

3. After some time device stop working?

Reasons:
1) Power supply is not working properly.
2) The equipment from overheating.
Solution:
1) Check if there is contact with abnormal voltage is too high or too low.
2) Check the ambient conditions, vents are normal ventilation.
4. REG LED flashes?
Reasons:
1) Fiber failure.
2) Central office equipment failure.
Solution:
1) Inspect fiber is connected properly, is connected to the correct
connector, optical power is normal.
2) Contact your operator.