会議システム Crestron AM-100 AirMediaのPDF クイックスタートマニュアルをオンラインで閲覧またはダウンロードできます。Crestron AM-100 AirMedia 2 ページ。 Airmedia presentation gateway
Crestron AM-100 AirMedia にも： クイック・スタート・マニュアル (2 ページ)
ページを印刷する
AM-100
AirMedia™ Presentation Gateway
Introduction
1
AirMedia™ by Crestron
®
delivers a very simple, low-cost wireless HD presentation solution.
Hardware Hookup
2
Make the necessary connections as called out in the illustration that follows this paragraph. When
making connections to the AM-100, use Crestron power supplies for Crestron equipment. Apply
power after all connections have been made.
LAN:
10BASE-T/100BASE-TX
Ethernet to Lan
USB:
Not Used
NOTE: Typical installation uses only the HDMI OUT or the VGA OUT-AUDIO OUT connection.
Operations: Presenter
3
This section provides instructions for sharing a desktop to a display device. For instructions on
remotely viewing a shared desktop, refer to section
Make all connections as described in "Hardware Hookup" in section
device shows the AM-100 welcome screen.
1
For details, refer to the AM-100 Operations Guide,
Doc. 7463.
QUICKSTART DOC. 7464B (2036013)
HDMI OUT:
5V 2.6A:
To Projector HDMI Input
From AC Power Pack
VGA OUT:
AUDIO OUT:
To Projector VGA Input
To Projector Audio Input
(Use with AUDIO OUT)
(Use with VGA OUT)
∫
on page 2.
∏
. The connected display
www.crestron.com
07.13
Specifications subject to
change without notice.
Download the Client Software
The AM-100 uses client software to share a PC or Mac
computer should be able to access the AM-100 over the network.
NOTE: Mobile devices can share their content using the AirMedia app which is available for iOS
Android™ devices. Download the latest version from the App Store
1.
On the computer, open a Web browser and navigate to the Web address or IP address displayed on
the top-left of the AM-100 welcome screen. The download screen is displayed.
2.
Click the Download icon for the computer's operating system The client requires no installation. The
client can either be saved and ran locally, or run from the Internet.
NOTE: When used on a Mac, the AirMedia application must be run from within the disk image file.
Do not drag the application out of the disk image file.
Share the Computer Display
1.
Run the client software. The "Login" screen is displayed.
2.
In the Code field, enter the code displayed on the AM-100 welcome screen and click Connect. The
client establishes a connection between the computer and the AM-100 while displaying the
presentation control screen on the computer.
Whatever is on the computer is shown on the display connected to the AM-100.
3.
Use the following controls to direct the presentation:
Stop showing the computer's screen.
A
Start showing the computer's screen.
H
Freeze the computer's screen.
b
X
Close client application and the connection between the computer and the AM-100.
Display a popup menu of additional options. Refer to "Other Controls" on page 2.
–
Minimizes the Presentation Control screen.
(Continued on following page)
888.273.7876
201.767.3400
(hereafter referred to as "computer") desktop. The
®
and
®
in iTunes
or Google Play™.
SM
®
5808