- ページ 23

液晶テレビ Sharp AquosのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp Aquos 41 ページ。 Led backlight tv / monitor
Sharp Aquos にも：ユーザーマニュアル (30 ページ), 操作マニュアル (35 ページ), 操作マニュアル (37 ページ)

ページを印刷する

Settings

Personal (Continue)

Power Control

No operation off

When you enable this function, the TV automatically shuts down if no

operation is performed for more than 3 hours.

(30 minutes/1 hour/3 hours/Disable)

NOTE

When it is 5 minutes before the power shuts down, the remaining time will

start to keep appearing every minute.

No signal off

When this function is enabled, the TV automatically shuts down if no signal is

received for more than 15 minutes.

NOTE

When it is 5 minutes before the power shuts down, the remaining time will

start to keep appearing every minute.

When a TV programme finishes, this function may not operate.

Operation Lock Out

This function locks the operation buttons on the TV.

Button control lock: All buttons on the TV, except POWER, are locked.

Disable: No adjustment.

Network & Internet

Network Settings

Configure the WIFI and Ethernet settings.

AQUOS Remote Control

Set this function when operating the TV from equipment connected by LAN or

wireless LAN.

Remote Control App

When "Remote Control App" is selected, "Change" will be highlighted.

Press ENTER.

Detailed Settings

Make the detailed settings (Login ID, Password).

Follow the on-screen instructions to configure the settings.

Sleep Timer

Allows you to set a time when the TV automatically switches to standby.

The remaining time displays when the sleep timer has been set.

Set the Sleep Timer.

When set, the time automatically starts counting down.

When it is 5 minutes before the time expires, the remaining time will start

to keep appearing every minute.

NOTE

The TV will enter standby when the remaining time reaches 0.

EN 4-8