Sharp Aquos 운영 매뉴얼 - 페이지 23
{카테고리_이름} Sharp Aquos에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp Aquos 41 페이지. Led backlight tv / monitor
Sharp Aquos에 대해서도 마찬가지입니다: 사용자 설명서 (30 페이지), 운영 매뉴얼 (35 페이지), 운영 매뉴얼 (37 페이지)
![Sharp Aquos 운영 매뉴얼](/uploads/products/server2/5031735/5031735.png)
<<
Settings
Personal (Continue)
Power Control
No operation off
When you enable this function, the TV automatically shuts down if no
operation is performed for more than 3 hours.
(30 minutes/1 hour/3 hours/Disable)
NOTE
When it is 5 minutes before the power shuts down, the remaining time will
start to keep appearing every minute.
No signal off
When this function is enabled, the TV automatically shuts down if no signal is
received for more than 15 minutes.
NOTE
When it is 5 minutes before the power shuts down, the remaining time will
start to keep appearing every minute.
When a TV programme finishes, this function may not operate.
Operation Lock Out
This function locks the operation buttons on the TV.
Button control lock: All buttons on the TV, except POWER, are locked.
Disable: No adjustment.
ENGLISH | 中文(台灣) | 中文(香港) | 中文 | FRANÇAIS | PORTUGUÊS | INDONESIA | ภาษาไทย | TIẾNG VIỆT | | ﻋرﺑﻲРУССКИЙ | O'ZBEK TILIDA
Network & Internet
Network Settings
Configure the WIFI and Ethernet settings.
AQUOS Remote Control
Set this function when operating the TV from equipment connected by LAN or
wireless LAN.
Remote Control App
When "Remote Control App" is selected, "Change" will be highlighted.
Press ENTER.
Detailed Settings
Make the detailed settings (Login ID, Password).
Follow the on-screen instructions to configure the settings.
Sleep Timer
Allows you to set a time when the TV automatically switches to standby.
The remaining time displays when the sleep timer has been set.
Set the Sleep Timer.
When set, the time automatically starts counting down.
When it is 5 minutes before the time expires, the remaining time will start
to keep appearing every minute.
NOTE
The TV will enter standby when the remaining time reaches 0.
EN 4-8
>>