- ページ 28

ステレオシステム Sharp CD-BA250HのPDF 操作マニュアルをオンラインで閲覧またはダウンロードできます。Sharp CD-BA250H 42 ページ。 Mini component system
Sharp CD-BA250H にも: 操作マニュアル (5 ページ), クイックマニュアル (4 ページ)

Sharp CD-BA250H 操作マニュアル
Using the Radio Data System (RDS) (continued)
„ To automatically play the desired pro-
gramme (EON-PTY)
When the desired type of programme is broadcast, the radio switches to it automati-
cally.
1
Tune in to an RDS station (when a station name is displayed).
2
Press the EON button when "EON" appears.
z "PTY TI" and "SELECT" will appear alternately for about 6 seconds.
z If the EON button is pressed when "EON" is not displayed, "NO EON" will ap-
pear for 5 seconds to indicate that the unit cannot enter the EON stand-by
mode.
3
Whilst they are displayed, select the desired programme type by
pressing the
The selected programme type will flash.
4
Within 4 seconds, press the PTY.TI SEARCH button.
z The selected programme type and "WAITING" will be displayed for 2 seconds
each.
z "PTY" will appear, and the unit will enter the EON-PTY stand-by mode.
E-22
ENGLISH
PRESET
or
PRESET
5
When the specified programme starts on an ON (other network)
station, the unit will automatically switch to the station and "PTY"
will flash.
6
When the programme is over, the unit will automatically return to
the original station.
Checking the stand-by mode setting:
When in the EON stand-by mode, press the EON button. ("Programme type"
"WAITING")
To cancel the EON stand-by mode:
When in the EON stand-by mode, press the EON button. Within 4 seconds, press it
again. ("PTY" will go out.)
About the PTYI (Dynamic PTY Indicator):
"PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is
received. Dynamic PTY indicates that the PTY for the station tuned in, or the PTY ref-
button.
erenced in the EON data, is assessed whenever the programme changes and may
be changed.
PTYI
Lights up
Goes out
Note:
When "PTYI" appears, press the DISPLAY MODE button to check the type of the cur-
rent programme.
Meaning
Tuned in to a dynamic PTY station.
Tuned in to a static PTY.