- ページ 13

オール・イン・ワン・プリンター Sharp AR-C360PのPDF ソフトウェア・インストール・マニュアルをオンラインで閲覧またはダウンロードできます。Sharp AR-C360P 29 ページ。 Sharp ar-c360p: supplementary guide
Sharp AR-C360P にも：印刷マニュアル (46 ページ)

ページを印刷する

Macintosh

Network Interface Connection

IMPORTANT!

Before connecting the network cable, install the

Ferrite Core. See "1 Install the Ferrite Core" on

page 2.

• Requires Mac

OS 9.2 or 10.2.4, and above,

running on a Macintosh computer with EtherTalk

interface.

• Ethernet cable is not supplied with the printer.

Use an Ethernet crossover cable with RJ45

connectors at either end.

1. Turn the printer OFF.

2. Remove the protective cover from the network

connector on the printer.

3. Connect your Ethernet cable to the network

port on the printer server.

4. Connect the other end of the Ethernet cable to

the network port.

Installation

USB Interface Connection

• Requires Mac OS 9.2 or above

• Printer operation is not assured if another USB

compatible device is connected concurrently with

it.

• If a USB hub is used, it must be connected

directly to the computer.

• Depending on the size of the document, if the

memory setting for the print monitor is low, you

may not be able to print in the background. To

correct for this, increase the memory setting for

the print monitor.

1. Turn the computer and the printer OFF.

2. Connect the USB cable to the USB port on the

computer.

3. Connect the other end of the cable to the USB

port on the printer.