Sharp AR-C360P 소프트웨어 설치 매뉴얼 - 페이지 13
{카테고리_이름} Sharp AR-C360P에 대한 소프트웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Sharp AR-C360P 29 페이지. Sharp ar-c360p: supplementary guide
Sharp AR-C360P에 대해서도 마찬가지입니다: 인쇄 매뉴얼 (46 페이지)
페이지 인쇄
®
Macintosh
Network Interface Connection
IMPORTANT!
Before connecting the network cable, install the
Ferrite Core. See "1 Install the Ferrite Core" on
page 2.
®
• Requires Mac
OS 9.2 or 10.2.4, and above,
running on a Macintosh computer with EtherTalk
interface.
• Ethernet cable is not supplied with the printer.
Use an Ethernet crossover cable with RJ45
connectors at either end.
1. Turn the printer OFF.
2. Remove the protective cover from the network
connector on the printer.
3. Connect your Ethernet cable to the network
port on the printer server.
4. Connect the other end of the Ethernet cable to
the network port.
Installation
USB Interface Connection
• Requires Mac OS 9.2 or above
• Printer operation is not assured if another USB
compatible device is connected concurrently with
it.
• If a USB hub is used, it must be connected
directly to the computer.
• Depending on the size of the document, if the
memory setting for the print monitor is low, you
may not be able to print in the background. To
correct for this, increase the memory setting for
the print monitor.
1. Turn the computer and the printer OFF.
2. Connect the USB cable to the USB port on the
computer.
3. Connect the other end of the cable to the USB
port on the printer.
13