- ページ 6
オール・イン・ワン・プリンター Sharp BP-50C31のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Sharp BP-50C31 46 ページ。 Digital full colour multifunctional system
Sharp BP-50C31 にも： クイック・スタート・マニュアル (45 ページ)
ページを印刷する
BEFORE USING THE MACHINE
(1)
(2)
(12)
(13)
*1
(1)
Motion sensor
This sensor detects the presence of a person that approaches
the machine, and automatically wakes the machine from sleep
mode (Motion Sensor Mode Only).
(2)
[Power] button
Use this button to turn the machine's power on and off.
TURNING ON/OFF THE POWER (page 7)
(3)
Document feeding area cover
Open this cover to remove an original misfeed or clean the
paper feed roller.
(4)
Original guides
These guides help ensure that the original is scanned correctly.
Adjust the guides to the width of the original.
(5)
Document feeder tray
Originals must be placed face up.
(6)
Original exit tray
The original is discharged to this tray after scanning.
*1
(7)
Keyboard
Use this as a substitute for the soft keyboard displayed on the touch
panel.
When not being used, it can be stored under the operation panel.
(8)
Telephone line jack (LINE)
When the fax function of the machine is used, the telephone line
is connected to this jack.
(9)
Extension phone jack (TEL)
When the fax function of the machine is used, an
extensionphone can be connected to this jack.
*1 Can only be used on the BP-70C31/70C36/70C45/70C55/70C65.
*2 Peripheral device. For more information, see the User's Manual.
6
(5)
(3)
(4)
(6)
(7)
(10)
(14)
(15)
(16)(17)
*2
*2
(8)
(9)
(18)
(10)
USB port (A type)
This is used to connect a USB device such as a USB memory
device to the machine.
(11)
LAN connector
Connect the LAN cable to this connector when the machine is
used on a network.
(12)
Main power switch
Use this button to turn the machine's power on and off.
►
TURNING ON/OFF THE POWER (page 7)
(13)
Toner collection container
This container collects excess toner that remains after printing.
(14)
Toner cartridge
This cartridge contains toner.
When the toner in a cartridge runs out, replace with new one.
(15)
Fusing unit
Heat is applied here to fuse the transferred image onto the
paper.
The fusing unit is hot. Take care not to burn yourself
when removing a misfeed.
(16)
Right side cover
Open this cover to remove a paper misfeed.
(17)
Paper reversing section cover
This unit is used for reversing paper when 2-sided printing is
performed. Open this cover to remove a paper misfeed.
(18)
Power plug
(10)
(11)
Facsimile
expansion kit