- ページ 7

オール・イン・ワン・プリンター Sharp BP-50C31のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Sharp BP-50C31 46 ページ。 Digital full colour multifunctional system
Sharp BP-50C31 にも：クイック・スタート・マニュアル (45 ページ)

ページを印刷する

TURNING ON/OFF THE POWER

This section describes how to turn on/off the machine's power and how to restart the machine.

Operate two power switches: the main power switch inside the front cover, located in the lower left corner, and the

[Power] button on the operation panel.

Turning on the power

• Turn the main power switch to the "

• When the main power indicator lights, press the [Power] button.

Turning off the power

• Press the [Power] to turn off the power, and then tap the [Power Off] key.

To turn off the power for an extended time, press the [Power] button to turn off the power, and switch the main power

switch to the "

" position after the operation panel screen disappears.

Restart the machine

• Press the [Power] button to turn off the power, and tap the [Power off] key on the touch panel. After that, press the

[Power] button again to turn on the power.

Main power indicator

Main power switch

• When turning off the main power switch, press the [Power] button on the operation panel and then turn the main power

switch to the "

" position.

In a sudden case of main power outage, turn the power for the machine back on and then turn it off in the correct order.

If the machine is left for a long time with the main power having been turned off prior to the [Power] button being turned off,

abnormal noises, degraded image quality or other problems may result.

• Turn off both the [Power] button and the main power switch and unplug the power cord if you suspect a machine failure, if

there is a bad thunderstorm nearby, or when you are moving the machine.

• When using the fax or Internet fax function, always keep the main power switch in the "

• In order for some settings to take effect, the machine must be restarted. In some states of the machine, restarting with the

[Power] button may not make the settings take effect. In this case, turn off the main power switch and then turn it on again.

BEFORE USING THE MACHINE

" position.

[Power] button

" position.