- ページ 5
自転車アクセサリー Shimano BL-IM60-AのPDF ディーラーズマニュアルをオンラインで閲覧またはダウンロードできます。Shimano BL-IM60-A 27 ページ。 Hub roller brake
ページを印刷する
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. Installation
- 3. List of Tools to be Used
- 3. Installation of the Lever
- 3. Installing the INTER M Brake to the Hub Body
- 3. Installation of the Hub to the Frame
- 3. Installation of the Brake Cable
- 4. Adjustment
- 4. Adjusting the Brake Cable
- 5. Maintenance
- 5. Applying Grease
TO ENSURE SAFETY
TO ENSURE SAFETY
• When installing components, be sure to follow the instructions that are given in the instruction manuals.
It is recommended that you use only genuine Shimano parts. If parts such as bolts and nuts become loose or damaged, the bicycle may
suddenly fall over, which may cause serious injury.
In addition, if adjustments are not carried out correctly, problems may occur, and the bicycle may suddenly fall over, which may cause serious
injury.
•
Be sure to wear safety glasses or goggles to protect your eyes while performing maintenance tasks such as replacing parts.
• After reading the dealer's manual thoroughly, keep it in a safe place for later reference.
Be sure to also inform users of the following:
• Each bicycle's brake system may handle slightly differently depending on the model. Therefore, be sure to learn the proper braking technique
(including brake lever pressure and bicycle control characteristics) and operation of your bicycle.
Improper use of your bicycle's brake system may result in loss of control or an accident, which could also lead to severe injury. For proper
operation, consult your professional bicycle dealer or the bicycle's owner's manual. It is also important to practice riding and your braking
technique, etc.
• You need to use the Shimano front INTER M brake body and the hub as a set (excluding BR-C6060). The hub of the Shimano front INTER M
brake has a built-in power modulator. This system controls the braking force so that excessive force is not applied if the braking force reaches
the specified value. If the front brake is applied too strongly in case the hub is not equipped with the power modulator, the wheel may lock
and the bicycle may fall forward, and serious injury may result.
• Never tighten the inner cable fixing bolt with it attached to your bicycle. Doing so may cause the inner cable fixing bolt to detach.
< Front >
• If using the hub roller brakes in combination with a suspension fork, care must be taken when selecting the suspension fork to use. Please
consult with the shop or the bicycle manufacturer. If an incorrect type of suspension fork is selected, it could prevent the suspension fork from
functioning properly because of overheating during braking or lack of strength in the fork, which could result in an accident.
WARNING
< Rear >
5