Shimano BL-IM60-A Посібник дилера - Сторінка 5

Переглянути онлайн або завантажити pdf Посібник дилера для Аксесуари для велосипедів Shimano BL-IM60-A. Shimano BL-IM60-A 27 сторінок. Hub roller brake

Друкувати сторінку

TO ENSURE SAFETY

• When installing components, be sure to follow the instructions that are given in the instruction manuals.

It is recommended that you use only genuine Shimano parts. If parts such as bolts and nuts become loose or damaged, the bicycle may

suddenly fall over, which may cause serious injury.

In addition, if adjustments are not carried out correctly, problems may occur, and the bicycle may suddenly fall over, which may cause serious

injury.

•

Be sure to wear safety glasses or goggles to protect your eyes while performing maintenance tasks such as replacing parts.

• After reading the dealer's manual thoroughly, keep it in a safe place for later reference.

Be sure to also inform users of the following:

• Each bicycle's brake system may handle slightly differently depending on the model. Therefore, be sure to learn the proper braking technique

(including brake lever pressure and bicycle control characteristics) and operation of your bicycle.

Improper use of your bicycle's brake system may result in loss of control or an accident, which could also lead to severe injury. For proper

operation, consult your professional bicycle dealer or the bicycle's owner's manual. It is also important to practice riding and your braking

technique, etc.

• You need to use the Shimano front INTER M brake body and the hub as a set (excluding BR-C6060). The hub of the Shimano front INTER M

brake has a built-in power modulator. This system controls the braking force so that excessive force is not applied if the braking force reaches

the specified value. If the front brake is applied too strongly in case the hub is not equipped with the power modulator, the wheel may lock

and the bicycle may fall forward, and serious injury may result.

• Never tighten the inner cable fixing bolt with it attached to your bicycle. Doing so may cause the inner cable fixing bolt to detach.

< Front >

• If using the hub roller brakes in combination with a suspension fork, care must be taken when selecting the suspension fork to use. Please

consult with the shop or the bicycle manufacturer. If an incorrect type of suspension fork is selected, it could prevent the suspension fork from

functioning properly because of overheating during braking or lack of strength in the fork, which could result in an accident.

WARNING

< Rear >