- ページ 26
自転車アクセサリー Shimano BR-M6000のPDF ディーラーズマニュアルをオンラインで閲覧またはダウンロードできます。Shimano BR-M6000 39 ページ。 Hydraulic disc brake
Shimano BR-M6000 にも： ディーラーズマニュアル (39 ページ)
ページを印刷する
- 1. Table of Contents
- 1. Important Notice
- 2. To Ensure Safety
- 3. List of Tools to be Used
- 4. Installation
- 4. Disc Brake Mount Adapter (for 180Mm Disc Brake Rotors)
- 4. Disc Brake Rotor Adapter
- 4. Brake Hose
- 5. Maintenance
- 5. Adding Shimano Genuine Mineral Oil and Bleeding Air
- 5. Replacing the Brake Hose
- 5. Replacing the Brake Pads
MAINTENANCE
Adding Shimano genuine mineral oil and bleeding air
9
(A)
(B)
10
To be continued on next page
Once no more air bubbles come from the
bleed boss, temporarily close the bleed
screw.
With the brake lever depressed, open
and close the bleed screw in rapid
succession (for approximately 0.5 seconds
each time) to release any air bubbles
which may be in the brake calipers.
Repeat this procedure about 2 to 3
times.
Then tighten the bleed screw again.
26
(A)
Bleed screw
(B)
Bleed boss
Tightening torque
4 - 7 N·m