- ページ 14

自転車アクセサリー Shimano BR-M965のPDF サービスマニュアルをオンラインで閲覧またはダウンロードできます。Shimano BR-M965 41 ページ。 Disc brake systems

Notes on

installation

Hydraulic

Brake pads

Disc Brake

If the brake pads are contaminated with oil, if the brake

pads are worn down to a thickness of 0.5mm (0.9mm), or

if the brake pad presser springs are interfering with the

rotor, it is recommended that you replace the brake pads.

At such times, Do not apply any pad grease to prevent

brake noise. If pad grease is applied, the grease will melt

due to heat from the pads during riding, and the grease

may get onto the surface of the pads affecting braking

performance. Furthermore always replace the snap rings

or cotter pins when replacing the brake pads.

Hydraulic

Rotors

Disc Brake

If the rotors are bent or severely damaged, they should be replaced.

Hydraulic

Cable type

Disc Brake

I During installation or maintenance,

do not touch the rotor while it is

turning, otherwise injury may result.

Hydraulic

Disc Brake

I The hose should be long enough so that it will not be damaged or

become disconnected if the bicycle falls over.

Hydraulic

Disc Brake

I When connecting the hose, apply Shimano genuine mineral oil to the

O-ring to help preserve the O-ring from deterioration.

Cable type

Disc Brake

Cable type

Disc Brake

M08

0 0 . . 5 5

M05

0 0 . . 9 9

(M515, C601)