Shimano BR-M965 Service Manual - Page 14
Browse online or download pdf Service Manual for Bicycle Accessories Shimano BR-M965. Shimano BR-M965 41 pages. Disc brake systems
Print Page
Notes on
installation
Hydraulic
Brake pads
Disc Brake
If the brake pads are contaminated with oil, if the brake
pads are worn down to a thickness of 0.5mm (0.9mm), or
if the brake pad presser springs are interfering with the
rotor, it is recommended that you replace the brake pads.
At such times, Do not apply any pad grease to prevent
brake noise. If pad grease is applied, the grease will melt
due to heat from the pads during riding, and the grease
may get onto the surface of the pads affecting braking
performance. Furthermore always replace the snap rings
or cotter pins when replacing the brake pads.
Hydraulic
Rotors
Disc Brake
If the rotors are bent or severely damaged, they should be replaced.
Hydraulic
Cable type
Disc Brake
Disc Brake
I During installation or maintenance,
do not touch the rotor while it is
turning, otherwise injury may result.
Hydraulic
Disc Brake
I The hose should be long enough so that it will not be damaged or
become disconnected if the bicycle falls over.
Hydraulic
Disc Brake
I When connecting the hose, apply Shimano genuine mineral oil to the
O-ring to help preserve the O-ring from deterioration.
13
Cable type
Disc Brake
Cable type
Disc Brake
M08
0 0 . . 5 5
mm
M05
0 0 . . 9 9
mm
(M515, C601)