- ページ 3
釣具 Shimano DENDOUMARU 4000HPのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Shimano DENDOUMARU 4000HP 32 ページ。
ページを印刷する
Digital Counter Component Names
•
Note: The drawing shows
all LCD light-up for
explanation purpose only.
Top/Bottom switch
In standard mode,
pressed once, and it
One touch
switches from Top
Mode to Bottom Mode.
Memo, Zero-setting switch
In Top Mode, the present
water-depth goes to the
One touch
memory.
The same for Bottom
Mode, the present depth is
0.0M, and it is counted
from the bottom up.
Zero-setting
Adjust the hook to the water
More than
surface and do zero-setting.
3 sec.
Mode switch
It will switch in sequence
from "学習 (Learning)"
One-touch
to "指定 (Specify)" to
on the
"下巻 (Wind-down)" at
front tiny
every push.
bottom
Note: Wind-down mode
does not apply to this
model specifications.
Present water-depth
"Top Mode": Depth measured from top.
"Bottom Mode": Depth measured from bottom.
Note: Do not let out 999m or more of line.
Doing so will result in inaccurate count values.
Note: Depth is measured in 10cm units.
(When over 100m, the unit becomes
1 m as in the depicted below.)
Wind-up power
底 (Bottom) : It lights up during "Bottom Mode".
(line tension) is displayed
When there is no light, it means "Top Mode".
in numbers.
(the number is not kg)
Various display
It lights up at each mode:
学習 (Learning), 指定 (Specify), and 下巻 (Wind-down).
Note: Wind-down mode does not apply to this model specifications.
Zero-setting: It lights up when you do 0-setting.
Various display
: It will light up when the battery is weak.
(below 10.5V)
It shows the present wind-up speed
setting.
Speed selection switch
For wind-up speed, selection of
15 speed levels.
When the motor stops,
once the low speed switch
More than
is pressed, auto-line
3 sec.
delivery will alternate
between ON/OFF.
Displays memorized water-depth.
Main switch
Motorized wind-up ON/OFF
switch. It works only when
pressed and held after
stopping at gunnel.
Auto-line delivery function
When the hook dropped reaches
10M, the motor will start turning
automatically causing the spool to
turn easily at line direction. When
you OFF the function, "糸送止 (Line
delivery stop)" indicator will light up.
3