- ページ 14
自転車 Shimano Ultegra 6770 SeriesのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Shimano Ultegra 6770 Series 24 ページ。
ページを印刷する
$ Installation and removal of the battery
1.
Open the clamp, and then install the battery so that it follows the groove in the battery mount. Close the clamp until it clicks
into place.
2.
Open the clamp, pull out the battery slightly, and then press the button to fully remove the battery.
$ Rear junction: Connection of junction (B)
External type (SM-JC40)
1.
Connect the electric wires to junction (A) and junction (B). Be sure to push them together until they
connect with a click.
Junction (B)
26
Clearance
Junction (A)
2.
Connect the electric wires to the front derailleur, the rear derailleur and the battery mount.
At front derailleur
At rear derailleur
3.
Provisionally secure the electric wire along the frame with tape, and
then connect it to junction (B).
* When routing the electric wire to the rear derailleur, be sure to
install it to the bottom of the chainstay to avoid any interference
between the cable and the chain.
* Wind any excess length of electric wire inside junction (B) to adjust
the length.
Example of adjusting junction (B) length
At battery mount
27