- ページ 11

制御システム Crestron 4K DigitalMedia 3-SeriesのPDF 補足マニュアルをオンラインで閲覧またはダウンロードできます。Crestron 4K DigitalMedia 3-Series 20 ページ。 Media presentation controller
Crestron 4K DigitalMedia 3-Series にも：クイック・スタート・マニュアル (2 ページ), マニュアルより (2 ページ), クイック・スタート・マニュアル (7 ページ), クイックスタート (2 ページ), クイック・スタート・マニュアル (8 ページ), マニュアルより (2 ページ), マニュアルより (2 ページ)

Configuration Using SIMPL Windows

Using SIMPL Windows, adjust underscan in subslot 02 of the Outputs slot for the

DMPS3-4K-150-C. Set the <Scaler_Underscan_Mode> analog input join to the desired

value.

NOTE:

The output resolution of the scaler is user selectable. To select the output resolution, use

the web interface or SIMPL Windows as discussed in the following sections.

An overview of the steps necessary to select the output resolution of the scaler is as follows:

NOTE:

1. On the Main Setup page, click the INTERNAL SCALER Settings button.

3. (Applicable only when EDID Preferred is selected in the Current Scaler Resolution

Configuration Using SIMPL Windows

Using SIMPL Windows, set the output resolution in subslot 02 of the Outputs slot for the

DMPS3-4K-150-C. To do so, set the <Scaler_User_Resolution_Index> analog input join

to the desired value.

NOTE:

Supplemental Guide – DOC. 7724A

For detailed information, refer to the SIMPL Windows help file.

For detailed information, refer to the online help of the web interface.

The Output Configuration page for the internal scaler opens.

In the Current Scaler Resolution list, click the desired setting.

list) In the Preferred EDID list, click the radio button that corresponds to the

preferred EDID setting.

Output Configuration Page for Internal Scaler—Current Scaler Resolution Configuration

For detailed information, refer to the SIMPL Windows help file.

DMPS3-4K-150-C: 3-Series 4K DigitalMedia Presentation System • 7