- ページ 4

産業機器 Digital Control DigiTrak Falcon F1のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Digital Control DigiTrak Falcon F1 6 ページ。

Locate Mode Screen

The Locate Mode screen appears if any menu is idle for more than 6 to 7

seconds, or immediately after a selection. To return to the Locate Mode

screen from any other screen, select

Transmitter and locator must be

display. To learn more, search the DCI DigiGuide App for "remote displays."

Basic Locating

Find the Front Locate Point (FLP) and Rear Locate Point (RLP) by

centering the target ball in the box. Mark the positions.

At the FLP, hold trigger for predicted depth reading. The Reference

indicator

icon will appear. The Locate Line (LL) may not appear if

this step is skipped.

Find the LL by centering the line in the box between the FLP and RLP.

See Locate Mode screen on previous page.

View depth by holding the trigger at the LL on the line between the

FLP and RLP.

To improve depth/data readings, hold the trigger five or more seconds

to enable Max Mode. For more information, search the

DigiGuide App

Signal Attenuation

If the signal strength flashes, this indicates extreme interference. Depth

and locate points may be comprised and the locator will not calibrate.

If the signal strength is not flashing but an

indicator at depths shallower than 8 feet, this is normal, and you can

ignore the

warning.

Paired

for "Max Mode."

Cancel

Exit

1. Locate point (ball)

2. Locator (box) with LL centered

3. Roll indicator and value

4. Roll/pitch update meter

5. Tx pitch

6. Tx Power Mode and signal strength

7. Tx temperature

and on the same band before data will

icon appears in the roll

DCI

- 4 -