Digital Control DigiTrak Falcon F1 Quick Start Manual - Page 4

Browse online or download pdf Quick Start Manual for Industrial Equipment Digital Control DigiTrak Falcon F1. Digital Control DigiTrak Falcon F1 6 pages.

Print Page
Locate Mode Screen
The Locate Mode screen appears if any menu is idle for more than 6 to 7
seconds, or immediately after a selection. To return to the Locate Mode
screen from any other screen, select
Transmitter and locator must be
display. To learn more, search the DCI DigiGuide App for "remote displays."
Basic Locating
1.
Find the Front Locate Point (FLP) and Rear Locate Point (RLP) by
centering the target ball in the box. Mark the positions.
2.
At the FLP, hold trigger for predicted depth reading. The Reference
R
indicator
icon will appear. The Locate Line (LL) may not appear if
this step is skipped.
3.
Find the LL by centering the line in the box between the FLP and RLP.
See Locate Mode screen on previous page.
4.
View depth by holding the trigger at the LL on the line between the
FLP and RLP.
5.
To improve depth/data readings, hold the trigger five or more seconds
to enable Max Mode. For more information, search the
DigiGuide App

Signal Attenuation

If the signal strength flashes, this indicates extreme interference. Depth
and locate points may be comprised and the locator will not calibrate.
If the signal strength is not flashing but an
indicator at depths shallower than 8 feet, this is normal, and you can
A
ignore the
warning.
Paired
for "Max Mode."
Cancel
Exit
or
1. Locate point (ball)
2. Locator (box) with LL centered
3. Roll indicator and value
4. Roll/pitch update meter
5. Tx pitch
6. Tx Power Mode and signal strength
7. Tx temperature
and on the same band before data will
A
icon appears in the roll
.
DCI
- 4 -