- ページ 18
産業機器 Siemens SIMATIC NET RUGGEDCOM RS1600のPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Siemens SIMATIC NET RUGGEDCOM RS1600 42 ページ。 Rugged ethernet switches
Siemens SIMATIC NET RUGGEDCOM RS1600 にも： インストレーション・マニュアル (42 ページ)
ページを印刷する
2.3.1
Mounting the Device to a Rack
For rack mount installations, the RUGGEDCOM RS1600 can be equipped with rack
mount adapters pre-installed.
Note
The chassis features multiple mounting holes, allowing the rack mount adapters to
be installed up to 25 mm (1 in) from the face of the device.
To secure the device to a standard 48 cm (19 in) rack, do the following:
1.
2.
3.
2.3.2
Mounting the Device on a DIN Rail
For DIN rail installations, the RUGGEDCOM RS1600 can be equipped with panel/DIN
rail adapters pre-installed on each side of the chassis. The adapters allow the device
to be slid onto a standard 35 mm (1.4 in) DIN rail.
RUGGEDCOM RS1600
Installation Manual, 11/2022, C79000-G8976-1013-04
Make sure the rack mount adapters are installed on the correct position on the
chassis.
1
Rack Mount Adapter
1
Figure 2.1
Rack Mount Adapters
Insert the device into the rack.
Note
Since heat within the device is channelled to the enclosure, it is recommended
that 1 rack-unit of space, or 44 mm (1.75 in), be kept empty above the device.
This allows a small amount of convectional airflow.
Forced airflow is not required. However, any increase in airflow will result in a
reduction of ambient temperature and improve the long-term reliability of all
equipment mounted in the rack space.
Secure the adapters to the rack using the supplied hardware.
Installing Device
2.3.1 Mounting the Device to a Rack
1
9