- ページ 20

産業機器 Siemens SIMATIC PCS 7のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Siemens SIMATIC PCS 7 39 ページ。 Process control system, basis library readme v9.0 sp1 online
Siemens SIMATIC PCS 7 にも：導入マニュアル (6 ページ), システムマニュアル (28 ページ), 機能マニュアル (42 ページ), 取扱説明書 (36 ページ), リード・ミー (26 ページ)

ページを印刷する

3 Program configuration

6. (Optional) Also set "IdleTime" to 0 if your do not need it for your application.

(Optional) Delete the "Interlock", "Permit" and "Protect" blocks in the example if

you do not need them.

Incorrect configuration and operation can lead to accidents and damage to

CAUTION

the system!

To ensure proper and safe operation of your system, it is necessary to integrate

various protective mechanisms into the program, depending on the drive, system

structure, and application, and to parameterize the MotSpdCL block and the

drive appropriately.

The necessary program structure and the required parameterization of the

blocks of your project may, therefore, differ from the application example.

Failure to observe this warning may result in accidents and damage to the

system.

More information on the "MotSpdCL" block and its setting options and feature

bits can be found in the PCS 7 Advanced Process Library manual.

https://support.industry.siemens.com/cs/ww/en/view/109781589

3.2.2

FB Drive

Interconnect tags

1. In the CFC plan, select the input "PZDIn1" of the "FbDrive" block. Right-click to

open the context menu and select "Interconnection to Address..."

Choose the first input word of the process image of the G120X

(here: "IW512_G12x").

All other input and output words will be automatically connected by the driver

generator during compilation.

Figure 3-6

Integration of a SINAMICS G120X frequency converter in PCS 7

Entry ID: 109793986,

V1.0,

09/2021