- ページ 27

産業機器 Siemens SIWAREX RのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SIWAREX R 38 ページ。 Mounting units for sb series
Siemens SIWAREX R にも：取扱説明書 (34 ページ)

Revision 09/04

Setting the overload protection:

•

Load the loading platform with the

maximum applicable load.

•

Set the overload protection

mechanism (11) in connection with

the nut (10) to 0.05 - 0,1 mm, see

dimension X in Fig. 3-3

•

Dimension X must also exist after

tightening the nut (10).

DANGER

Contaminated, icy or incorrectly set overload protection will create blockages

which cause incorrect measurements or can cause injury or damage to the

machinery by overloading the scale.

Assembly Inspection:

• The loading platform must be

able to swing freely.

• The countersunk bolts (9) should

be positioned as close to the

middle of the holes in the top

plate (18) as possible. The top

plate therefore has optimal

freedom of movement on all sides

and no secondary forces can be

generated.

• The countersunk bolts (9) must not

protrude past the top plate (18).

DANGER

Incorrectly adjusted counter-sunk bolts cause blockages which in turn result in

incorrect measurements or can lead to overloading the scale and damage to

equipment or injury to persons.

Document No.: A5E00353789B

Comb. Mounting Units

Fig. 3-3 Setting the overload

protection

Fig. 3-4 Overload Protection and

oscillation limitation

Page 27