- ページ 25

産業機器 Siemens SIWAREX WL230 BB-S SAのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SIWAREX WL230 BB-S SA 44 ページ。 Base plate and elastomer bearing bb-s sa
Siemens SIWAREX WL230 BB-S SA にも：マニュアル (36 ページ), 取扱説明書 (48 ページ), 設備マニュアル (50 ページ)

ページを印刷する

4.2.7

Set overload protection

Procedure

1. Load the load bearing implements with the maximum occurring load.

2. Set the overload protection with the nut to 0.05 to 0.1 mm

The dimension 0.05 to 0.1 mm

4.2.8

Compensation of height with four or more support points

Introduction

Check during the installation whether compensation of the height on the brackets is necessary

and meaningful.

Compensation of the height does not make any sense when the load bearing implement and/

or the foundation are elastic. With a rigid load bearing implement and rigid foundation, a bearing

with four or more points is considered as statically undefined. In such cases it is meaningful to

check the load on the individual load cells.

Compensation of the height is necessary in the following cases:

● A load cell is not loaded.

● Two diagonally opposite load cells are overloaded by a full scale.

BB-S SA

Operating Instructions, 03/2020, A5E47358100-AA

4.2 Installing the base plate and elastomer bearing

①

must remain the same even after locking the nut.

Installation

①