- ページ 11

プロジェクター Epson 1730W - PowerLite WXGA LCD ProjectorのPDF インストレーション・ハンドブックをオンラインで閲覧またはダウンロードできます。Epson 1730W - PowerLite WXGA LCD Projector 11 ページ。 Esc/vp21 command business projectors
Epson 1730W - PowerLite WXGA LCD Projector にも：パーツリスト (1 ページ), クイック・セットアップ・マニュアル (2 ページ), 適合宣言 (4 ページ), 仕様 (2 ページ), ユーザーマニュアル (1 ページ), ユーザーマニュアル (25 ページ), クイックセットアップ (2 ページ)

Epson PowerLite 1720 / 1730W

note

If you're using a remote

control ID other than the

default ID of zero, you have

to set the ID each time you

turn on the projector.

2. Press the

button on the remote control. You see a message on

the screen, showing the projector's ID:

If the message says the remote control is "On," then you can use

the remote control to operate that projector. If it says "Off," then

you have to change the ID of the remote control before operation

is possible, as described in the next section.

Setting the Remote Control ID

The remote control's default ID is zero. This lets it operate any

projector. To set it to operate only those projectors with a specific ID,

follow these steps:

1. Press and hold the

2. While holding the

remote control (1 through 9) that corresponds to the ID of the

projector(s) you want to operate. Selecting zero lets you control all

projectors.

INSTALLATION HANDBOOK

button on the remote control.

button, press the numbered button on the

Remote Control Information