- ページ 6

ページを印刷する

m information:

Display the information for a show or channel you

have scheduled. You can also change the schedule Information.

1. Select the Programmed

List icon on the left side of tile

Channel List screen, and then press the ENTER _

button.

2. On the Programmed

List screen, select the show or channel

entry you want information for, and then press the TOOLS

button. The Tools Menu appears.

3. Select Information,

and then press the ENTER_

button.

The Time Viewing Information screen appears.

4. Select Change Info and press the ENTER _

button

to change information, or select Close and press the

ENTER _

button to close the Information screen.

m Select All / Deselect All: You can select or deselect all

channels in the channel list.

C3Other Channel Menu Functions

Channel Mode (Added Channels/Favorite

Channels)

Lets you select the channel list displayed when you press the

ACHV

(Channel) button on your remote. For example, if you

select Favorite Channels, you will only see Favorite channels when

you press the ACHV

button.

Fine Tune

Analog channels only.

if the reception is clear, you do not have to fine tune the channel,

as this is done automatically during the search and store

operation. If the signal is weak or distorted, fine tune the channel

manually.

'_' Select the channel, and then select Fine Tune.

'_' Fine tuned channels that have been saved are marked with

an asterisk "*" on the right-hand side of the channel number

in the channel banner.

'_' To reset fine-tuning, select the channel, select Fine Tune, and

then select Reset on the Fine Tune screen.

Plug & Play

Lets you re-run the Plug & Play initial setup procedure. For

instructions, see your Quick Start Guide.

Language

Set the menu language.

'_' Choose between English, EspaSol, and Francais.

Setting the Time

Time

'_' The time you set will appear when you press the INFO

button.

[] Clock: Set the clock so you can use the various timer features

of the TV.

,s, If you disconnect the power cord, you have to set the

clock again.

To set the clock, follow these steps:

1. Select Setup >Time > Clock.

2. Press ENTER _

and select Auto or Manual, and then press

ENTER _

again.

If you selected Auto:

The TV will automatically download the correct time from a

digital channel.

,, Select Time Zone, and then press the ENTER_

button.

Use theA/_"

buttons to select your Time Zone, and then

press ENTER _.

,, Select DST (Daylight Savings Time), and then press

ENTER _.

Select On if you want to turn the DST

adjustment on and off manually. Select Off to turn off the

DST adjustment. Select Auto if you want the TV to adjust

to DST automatically. Press ENTER_

when done.

'_' DST and Time Zone function are only available when

the Clock Mode is set to Auto.

If you selected

Manual:

The Clock Set screen appears. Use the A/T

buttons to

change the values in each field or use the number buttons to

enter the values directly. Use the _1i/_, buttons to move from

field to field. When done with all the fields, press ENTER _.

'_' Available only when Clock Mode is set to Manual.

[] Sleep Timer

Automatically shuts off the TV after a preset period of time. (30,

60, 90, 120, 150 and 180 minutes).

'_' To cancel the Sleep Timer, select Off.

Timer 1 / Timer 2 / Timer 3

Turns the TV on and off automatically at times and days you

select. You can set three different on/off timer settings.

'_'

You must set the clockfirst.

[] On Time / Off Time: Set the hour, minute, am/pm, and

Activate/Inactivate fields for the On Time and Off Time. Use the

_1i/_, buttons to move from field to field. Use the A/T

buttons

to change the values in each field. To activate the timer with

the setting you have chosen, set the Activate/Inactivate field to

Activate.

[] Volume: Set the desired loudness.

[] Contents:

To select what will be turned on when the timer

setting is activated. You can set the TV to turn on a specific

channel or play back contents such as photo or audio files.

Use the _/_

buttons to move to move to the Contents field,

and then press the ENTER _

button. The Contents screen

appears. Use the _1i/_, buttons to move from field to field. Use

the ,k/_" buttons to change the values in each field.

- rv/usB:

Select TV or USB. The USB device must be

connected to your TV before you can select USB.

- Antenna: Displays the current antenna source, Air or Cable.

- Channel: If you have selected TV, select the desired channel.

- Music/Photo:

If you have selected USB, follow these steps to

select a folder containing MP3 (Music) or JPEG (Photo) files on

the USB device:

'_' The maximum displayed number of files, including sub

folders, in one folder of USB storage device is 2000.

'_' The media may not be playing smoothly when using the

device lower than USB 2.0.

1. Use the _/_

buttons to move to the field under Music

or the field under Photo, and then press the ENTER_

button. The TV displays a single folder (the Root folder)

and the type or name of the device.

_6_