- ページ 12

IP電話 Cisco 730のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco 730 46 ページ。 Ip phones with multiplatform firmware
Cisco 730 にも：マニュアル (16 ページ), 管理マニュアル (36 ページ), インストレーション・マニュアル (39 ページ), ユーザーマニュアル (44 ページ)

Bluetooth LED

The Bluetooth LED is located on the back of the left ear cup at the top of the Power/Bluetooth switch and

shows your headset connection status.

Table 1: Bluetooth LED Status

Light Status

Solid blue, then off

Blinks blue

You can use the Cisco Headsets mobile app to manage your headset Bluetooth connections. Your headset can

save up to eight Bluetooth devices and maintain an active connection with two at the same time.

Procedure

Step 1

On your mobile device, open the Cisco Headsets app.

Step 2

Tap Connected to at the bottom of the home screen.

Step 3

Select the device you wish to connect or disconnect.

Your Cisco Headset 730 comes with a USB Adapter for use with call devices that don't have a Bluetooth

option. The USB Adapter comes out of the box pre-paired to your headset. When the adapter is plugged into

a powered USB port, such as in a laptop or a Cisco Webex DX device, the adapter automatically connects to

your headset.

When you want to disconnect your headset, simply unplug the adapter from the call device. It takes about 10

minutes for your headset to accept another active Bluetooth connection after you disconnect the USB Adapter.

You can also turn your headset off then on again to quickly pair a new device.

Procedure

Step 1

Plug in your USB Adapter to your preferred device.

Cisco Headset 730 User Guide

System State

Successful Bluetooth connection

Headset in Pairing Mode

Your Headset