Cisco 730 사용자 설명서 - 페이지 12
{카테고리_이름} Cisco 730에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 730 46 페이지. Ip phones with multiplatform firmware
Cisco 730에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지), 관리 매뉴얼 (36 페이지), 설치 매뉴얼 (39 페이지), 사용자 설명서 (44 페이지)
페이지 인쇄
Bluetooth LED
Bluetooth LED
The Bluetooth LED is located on the back of the left ear cup at the top of the Power/Bluetooth switch and
shows your headset connection status.
Table 1: Bluetooth LED Status
Light Status
Solid blue, then off
Blinks blue
Manage Your Bluetooth Connections in the Cisco Headsets App
You can use the Cisco Headsets mobile app to manage your headset Bluetooth connections. Your headset can
save up to eight Bluetooth devices and maintain an active connection with two at the same time.
Procedure
Step 1
On your mobile device, open the Cisco Headsets app.
Step 2
Tap Connected to at the bottom of the home screen.
Step 3
Select the device you wish to connect or disconnect.
Use the USB Adapter
Your Cisco Headset 730 comes with a USB Adapter for use with call devices that don't have a Bluetooth
option. The USB Adapter comes out of the box pre-paired to your headset. When the adapter is plugged into
a powered USB port, such as in a laptop or a Cisco Webex DX device, the adapter automatically connects to
your headset.
When you want to disconnect your headset, simply unplug the adapter from the call device. It takes about 10
minutes for your headset to accept another active Bluetooth connection after you disconnect the USB Adapter.
You can also turn your headset off then on again to quickly pair a new device.
Procedure
Step 1
Plug in your USB Adapter to your preferred device.
Cisco Headset 730 User Guide
6
System State
Successful Bluetooth connection
Headset in Pairing Mode
Your Headset