Cisco 730 사용자 설명서 - 페이지 13

{카테고리_이름} Cisco 730에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 730 46 페이지. Ip phones with multiplatform firmware
Cisco 730에 대해서도 마찬가지입니다: 매뉴얼 (16 페이지), 관리 매뉴얼 (36 페이지), 설치 매뉴얼 (39 페이지), 사용자 설명서 (44 페이지)

페이지 인쇄

Your Headset

Step 2

Turn on your Cisco Headset 730.

Step 3

Select Cisco HS USB Adapter from your Bluetooth device list.

Pair the USB Adapter to Your Headset

You can re-pair your USB Adapter if you have erased your headset's Bluetooth pairings or need to replace

your adapter.

Procedure

Step 1

Connect the USB Adapter to your chosen device.

Step 2

Use a pen or a paper clip to press down the Pairing button on the USB Adapter for four seconds. The blue

LED on top of the adapter blinks when it enters pairing mode.

Step 3

On your headset, slide and hold the Power/Bluetooth switch for two seconds. The adapter and your headset

pair automatically.

Alternate Between Active Bluetooth Sources

You can connect up to two Bluetooth devices to your headset at one time. Active calls are automatically placed

on hold when you answer a call on a different source.

Procedure

To change your Bluetooth source, play music or answer a call on a different connected source.

Note

Delete Paired Devices

You can erase all saved Bluetooth devices from your headset.

Note

This will also erase the USB Adapter from your headset's memory. See

on page 7

Pause music playback before you switch to a different music source.

to re-pair the adapter to your headset.

Pair the USB Adapter to Your Headset

Pair the USB Adapter to Your Headset,

Cisco Headset 730 User Guide