- ページ 4
洗濯機 Siemens XQG60-WM08X0R00WのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens XQG60-WM08X0R00W 8 ページ。
ページを印刷するThe machine was tested before leaving the factory.To remove any water
left over from testing procedures,the first washing cycle should be
carried out without laundry in the machine
Sort and load the washing
Follow manufacturer's care information!
Sort according to the information on the care labels.
Sort according to type, colour, level of soiling and temperature.
Do not exceed the maximum load
bserve the instructions in the Important information section
Load both large and small items of washing together!
Close the washing machine door
Take care not to trap any items of clothing
between the loading door and rubber seal.
Add detergent and care product
Add the appropriate amount according to:
mount of laundry, level of soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
Pour liquid detergent into the appropriate dispenser.
During operation: take care when opening the detergent drawer!
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
or detailed programme informaton , see programme overview
Select additional functions
For additional options , see the function instruction
Press the Start/Soak button
The wash indicator light is on ,the programme starts.
Page 5.
1
Page 7.
Page 5!
2
3
4
Set the programme
page 7.
5
page 6.
6
Washing
Detergent drawer
with dispenser II,
, I
Drum
Controlpanel
Doorhandle
Maintenance cover
3
10
Removing the laundry
Open the washing machine door and remove the laundry.
If the loading door cannot be opened: Wait 2 minutes
(safety function is active).
9
Turn off the tap
8
Switch off
Set Programme selector to
Off.
7
Programme ended when ...
The spin indicator light flashes.
Change the programme ...
If you have accidentally selected the wrong programme:
– Turn the programme selector to a newly selected
programme. The wash indicator light flashes.
– If required, select additional functions.
– Press the Start/Soak button, new programme starts.
Soaking programme ...
The soaking function of machine can achieves a better
cleaning result by using considerably less energy.
– After programme start 10 minutes and the laundry have
been soaked through equably,press the Start/Soak
button, the programme is paused, start to soak.
– The soaking duration is suggested not to less than 30
minutes.
– Press the Start/Soak button after finish the soaking, the
programme is continued.
– Programme Quick 18' is not recommended to use the
soaking function.
... or terminate the progarmme
If you would like to terminate a programme:
– Turn the programme selector to Single Spin.
The wash indicator light flashes.
– Press the Start/Soak button.
The wash indicator light stop flashing, the spin indicator
light is on.
– Remove the laundry after the spining cycle.
4