- ページ 4

IP電話 Cisco 7940GのPDF 電話マニュアルをオンラインで閲覧またはダウンロードできます。Cisco 7940G 17 ページ。 Ios telephony services ip phone
Cisco 7940G にも：ユーザーマニュアル (21 ページ), ユーザーマニュアル (25 ページ), データシート (7 ページ), マニュアル (35 ページ), クイック・リファレンス (2 ページ), ユーザーマニュアル (15 ページ), クイック・リファレンス・マニュアル (2 ページ), ユーザーマニュアル (20 ページ), 管理者マニュアル (15 ページ), ユーザーマニュアル (16 ページ), リファレンス・マニュアル (24 ページ), 管理マニュアル (29 ページ), マニュアル (21 ページ), インストレーション・マニュアル (12 ページ), ユーザーマニュアル (10 ページ)

Once you connect the Cisco IP Phone to its power source, a startup process begins. After several

minutes, the phone's LCD displays a neutral "ready" screen. The details on your screen might vary,

but a ready screen typically displays the date and time, your extension number, and available softkeys.

Startup is complete and your phone is ready to use.

Softkeys point to feature options displayed along the bottom of your LCD screen. Softkeys

Tip

are flexible—they change depending on the status of your phone. For example, you can see

one set of softkey options when you pick up the handset, and another set when the phone is

not in use.

Headset Information

If you use a headset, connect it to the headset port. For information about headsets, see:

http://vxicorp.com/cisco.

Introducing Your Cisco IP Phone

A Cisco IP Phone is a full-feature telephone that provides voice communication over an IP (Internet

Protocol) network. This phone functions much like a traditional analog phone, allowing you to place and

receive telephone calls. It also supports features that you have come to expect from a telephone—such

as speed dialing, redial, call transfer, conference calling, and voice message access.

Your Cisco IP Phone offers features that might surprise you. Because it is part of an IP network, your

Cisco IP Phone can provide not only telephony services, but data services too—including

up-to-the-minute information from the Internet through an Extensible Markup Language (XML)-based

application. In short, your Cisco IP Phone provides a whole range of communication features that you

could not expect from a traditional telephone.

Why Does One Cisco IP Phone Behave Differently from Another?

The features exhibited by your Cisco IP Phone depend upon the call processing system (or "protocol")

that your phone uses.

To determine the protocol that your Cisco IP Phone uses, pick up the handset and then return the

handset to its cradle to reset the phone's LCD screen. The phone must be connected to a power source.

Observe your phone's LCD screen and compare it to the descriptions in Table 1. See the

"Documentation on the Web" section on page 11 for information about getting a user guide and other

documentation specific to your phone's protocol.