Cisco 7940G 전화 매뉴얼 - 페이지 4

{카테고리_이름} Cisco 7940G에 대한 전화 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco 7940G 17 페이지. Ios telephony services ip phone
Cisco 7940G에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (25 페이지), 데이터시트 (7 페이지), 매뉴얼 (35 페이지), 빠른 참조 (2 페이지), 사용자 설명서 (15 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지), 관리자 매뉴얼 (15 페이지), 사용자 설명서 (16 페이지), 참조 매뉴얼 (24 페이지), 관리 매뉴얼 (29 페이지), 매뉴얼 (21 페이지), 설치 매뉴얼 (12 페이지), 사용자 설명서 (10 페이지)

Once you connect the Cisco IP Phone to its power source, a startup process begins. After several

minutes, the phone's LCD displays a neutral "ready" screen. The details on your screen might vary,

but a ready screen typically displays the date and time, your extension number, and available softkeys.

Startup is complete and your phone is ready to use.

Softkeys point to feature options displayed along the bottom of your LCD screen. Softkeys

Tip

are flexible—they change depending on the status of your phone. For example, you can see

one set of softkey options when you pick up the handset, and another set when the phone is

not in use.

Headset Information

If you use a headset, connect it to the headset port. For information about headsets, see:

http://vxicorp.com/cisco.

Introducing Your Cisco IP Phone

A Cisco IP Phone is a full-feature telephone that provides voice communication over an IP (Internet

Protocol) network. This phone functions much like a traditional analog phone, allowing you to place and

receive telephone calls. It also supports features that you have come to expect from a telephone—such

as speed dialing, redial, call transfer, conference calling, and voice message access.

Your Cisco IP Phone offers features that might surprise you. Because it is part of an IP network, your

Cisco IP Phone can provide not only telephony services, but data services too—including

up-to-the-minute information from the Internet through an Extensible Markup Language (XML)-based

application. In short, your Cisco IP Phone provides a whole range of communication features that you

could not expect from a traditional telephone.

Why Does One Cisco IP Phone Behave Differently from Another?

The features exhibited by your Cisco IP Phone depend upon the call processing system (or "protocol")

that your phone uses.

To determine the protocol that your Cisco IP Phone uses, pick up the handset and then return the

handset to its cradle to reset the phone's LCD screen. The phone must be connected to a power source.

Observe your phone's LCD screen and compare it to the descriptions in Table 1. See the

"Documentation on the Web" section on page 11 for information about getting a user guide and other

documentation specific to your phone's protocol.