- ページ 13

スイッチ Siemens SITRANS LVL100のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Siemens SITRANS LVL100 32 ページ。 Vibrating switches
Siemens SITRANS LVL100 にも：取扱説明書 (32 ページ), 取扱説明書 (33 ページ), 取扱説明書 (32 ページ)

ページを印刷する

Inflowing medium

Product flow

half a turn. This is sufficient to reach the recommended installation

position.

In adhesive and viscous media, the surfaces of the tuning fork should

protrude into the vessel to avoid buildup. Therefore nozzles for flanges

and mountings bosses should not exceed a certain length.

Fig. 6: Adhesive products

If SITRANS LVL100 is mounted in the filling stream, unwanted false

measurement signals can be generated. For this reason, mount

SITRANS LVL100 at a position in the vessel where no disturbances,

e.g. from filling openings, agitators, etc., can occur.

To make sure the tuning fork of SITRANS LVL100 generates as little

resistance as possible to product flow, mount the sensor so that the

surfaces are parallel to the product movement.

SITRANS LVL100 - Operating Instructions

30 mm

(1.18")