Siemens SITRANS LVL100 Kullanım Talimatları Kılavuzu - Sayfa 13

Anahtar Siemens SITRANS LVL100 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Siemens SITRANS LVL100 32 sayfaları. Vibrating switches
Ayrıca Siemens SITRANS LVL100 için: Kullanım Talimatları Kılavuzu (32 sayfalar), Kullanım Talimatları Kılavuzu (33 sayfalar), Kullanım Talimatları Kılavuzu (32 sayfalar)

Inflowing medium

Product flow

half a turn. This is sufficient to reach the recommended installation

position.

In adhesive and viscous media, the surfaces of the tuning fork should

protrude into the vessel to avoid buildup. Therefore nozzles for flanges

and mountings bosses should not exceed a certain length.

Fig. 6: Adhesive products

If SITRANS LVL100 is mounted in the filling stream, unwanted false

measurement signals can be generated. For this reason, mount

SITRANS LVL100 at a position in the vessel where no disturbances,

e.g. from filling openings, agitators, etc., can occur.

To make sure the tuning fork of SITRANS LVL100 generates as little

resistance as possible to product flow, mount the sensor so that the

surfaces are parallel to the product movement.

SITRANS LVL100 - Operating Instructions

30 mm

(1.18")