Siemens SITRANS LVL100 Kullanım Talimatları Kılavuzu - Sayfa 14

Anahtar Siemens SITRANS LVL100 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Siemens SITRANS LVL100 32 sayfaları. Vibrating switches
Ayrıca Siemens SITRANS LVL100 için: Kullanım Talimatları Kılavuzu (32 sayfalar), Kullanım Talimatları Kılavuzu (33 sayfalar), Kullanım Talimatları Kılavuzu (32 sayfalar)

Note safety instructions

Connection cable

Housing overview

Plug versions

IO-Link

Connecting to power supply

5.1

Always keep in mind the following safety instructions:

Warning:

Connect only in the complete absence of line voltage.

•

The electrical connection must only be carried out by trained,

qualified personnel authorised by the plant operator.

•

Always switch off power supply, before connecting or disconnect-

ing the instrument.

The instrument is connected with standard three-wire cable without

shielding. If electromagnetic interference is expected which is above

the test values of EN 61326 for industrial areas, shielded cable should

be used.

Make sure that the cable used has the required temperature resist-

ance and fire safety for max. occurring ambient temperature

5.2

Fig. 7: Connection variant - M12 x 1 plug

M12 x 1 plug connection

This plug connection requires a prefabricated cable with plug. De-

pending on the version, protection IP66/IP67 or IP68 (0.2 bar).

For connection to binary inputs of a PLC.

For power supply, use an energy-limited circuit according to

EN 61010.

SITRANS LVL100 - Operating Instructions