- ページ 2

IP電話 Cisco Catalyst 4000のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Cisco Catalyst 4000 18 ページ。 For cisco business edition 4000
Cisco Catalyst 4000 にも：インストールの準備 (11 ページ), クイック・スタート・マニュアル (8 ページ), スタートマニュアル (31 ページ), エンドユーザマニュアル (6 ページ), エンドユーザマニュアル (6 ページ)

•

Dual-port high-speed synchronous serial and 16-port low-speed

synchronous/asynchronous serial. The high-speed ports supports EIA/TIA-232,

EIA/TIA-449, V.35, X.21, NRZ/NRZI, DTE/DCE, or EIA-530 DTE interfaces. The

low-speed ports support EIA/TIA-232, V.35, or X.21 interfaces in DTE or DCE mode.

Each low-speed port can be individually configured for synchronous or asynchronous.

•

Single-port HSSI

•

Single-port and dual-port Token Ring

•

Dual attachment single-mode FDDI

•

Single attachment or dual attachment multimode FDDI

•

Four-port or eight-port ISDN BRI

•

Four-port balanced or unbalanced G.703/G.704

•

Single-port channelized T1/ISDN PRI

•

Single-port balanced or unbalanced channelized E1/ISDN PRI

•

Single-port ATM with single-mode OC-3 and long-reach capability, multimode OC-3,

DS-3, or E3 interfaces

Note

configuration note packet shipped with your router.

Note

and RS-449 before their acceptance as standards by the Electronics Industries Association

(EIA) and Telecommunications Industry Association (TIA)

Figure 1-1 shows the front panel of a Cisco 4000 series router.

Figure 1-1

1-2 Cisco 4000 Series Installation Guide

For information about modules released after publication of this guide, see the

EIA/TIA-232 and EIA-TIA-449 were known as recommended standards RS-232

Cisco 4000 Series Chassis—Front Panel