- ページ 10

IP電話 Cisco IP DECT 6825のPDF ハードウェアのインストールをオンラインで閲覧またはダウンロードできます。Cisco IP DECT 6825 18 ページ。 Masergy
Cisco IP DECT 6825 にも：ユーザーマニュアル (17 ページ), ユーザーマニュアル (37 ページ), クイック・スタート・マニュアル (2 ページ), ユーザーマニュアル (7 ページ)

Mount the Base Station on the Wall

Step 4

Plug the Ethernet cable into the LAN port.

Step 5

If required, plug the power adapter into the electrical outlet.

What to do next

Configure the Base Station

Mount the Base Station on the Wall

You can mount the base station on a wall. You put two screws into the wall and slip the base station onto the

screw heads or you can use the ceiling mount bracket.

We recommend that you mount the base station as high as possible on a wall. If possible, mount it at a

downward facing angle for better radio coverage.

Each base station has a range of up to 984 feet (300 meters).

In this task, the term device means the base station.

Before you begin

You need:

• Pencil

• Level

• Tape measure

• Mounting hardware (screws and wall plugs) suitable for the wall construction. You can also use the

• LAN connection close to the mounting location.

• If you do not use PoE, a power outlet close to the mounting location.

Hardware Installation

ceiling mount bracket.

Hardware Installation