Cisco IP DECT 6825 하드웨어 설치 - 페이지 10
{카테고리_이름} Cisco IP DECT 6825에 대한 하드웨어 설치을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco IP DECT 6825 18 페이지. Masergy
Cisco IP DECT 6825에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지), 사용자 설명서 (37 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (7 페이지)
Mount the Base Station on the Wall
Step 4
Plug the Ethernet cable into the LAN port.
Step 5
If required, plug the power adapter into the electrical outlet.
What to do next
Configure the Base Station
Mount the Base Station on the Wall
You can mount the base station on a wall. You put two screws into the wall and slip the base station onto the
screw heads or you can use the ceiling mount bracket.
We recommend that you mount the base station as high as possible on a wall. If possible, mount it at a
downward facing angle for better radio coverage.
Each base station has a range of up to 984 feet (300 meters).
In this task, the term device means the base station.
Before you begin
You need:
• Pencil
• Level
• Tape measure
• Mounting hardware (screws and wall plugs) suitable for the wall construction. You can also use the
• LAN connection close to the mounting location.
• If you do not use PoE, a power outlet close to the mounting location.
Hardware Installation
10
ceiling mount bracket.
Hardware Installation