- ページ 21

IP電話 Cisco IP DECT 6825のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Cisco IP DECT 6825 37 ページ。 Masergy
Cisco IP DECT 6825 にも：ハードウェアのインストール (18 ページ), ユーザーマニュアル (17 ページ), クイック・スタート・マニュアル (2 ページ), ユーザーマニュアル (7 ページ)

Put a Call on Hold

Procedure

Step 1 From an active call, press Hold.

Step 2 Press Resume to pick the call back up.

Swap Between Active and Held Calls

When you have an active call and a held call, you can easily swap the calls. The current active calls goes on

hold and the previously held call becomes the active call.

Procedure

Press Swap.

Retrieve a Call on Hold with Call Park

You can pick up a parked call from anywhere in your network.

Before you begin

You need the number that was used to park the call.

Procedure

Step 1 Dial *66 + the parking spot the call was placed in and press Answer/Send

Step 2 You are now connected with the caller in that parking slot #.

Forward Calls

You can forward incoming calls from your phone to another number.

Enable Call Forward – All Calls

Procedure

Step 1 Lift the receiver and listen for dial tone.

Step 2 Press *72 or Forward softkey.

Step 3 When prompted, enter your PIN.

Step 4 Press 1.

Step 5 When prompted, enter the destination phone number, starting with a 1, i.e. 1 800 555 1212.

Disable Call Forward – All Calls

Procedure

Step 1 Lift the receiver and listen for dial tone.

Step 2 Press *72 or Forward softkey.

Step 3 When prompted, enter your PIN.

Step 4 Press 2.

21 |

P a g e

Cisco IP DECT 6825 Series User Guide