Cisco IP DECT 6825 사용자 설명서 - 페이지 21

{카테고리_이름} Cisco IP DECT 6825에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco IP DECT 6825 37 페이지. Masergy
Cisco IP DECT 6825에 대해서도 마찬가지입니다: 하드웨어 설치 (18 페이지), 사용자 설명서 (17 페이지), 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (7 페이지)

페이지 인쇄

Put a Call on Hold

Procedure

Step 1 From an active call, press Hold.

Step 2 Press Resume to pick the call back up.

Swap Between Active and Held Calls

When you have an active call and a held call, you can easily swap the calls. The current active calls goes on

hold and the previously held call becomes the active call.

Procedure

Press Swap.

Retrieve a Call on Hold with Call Park

You can pick up a parked call from anywhere in your network.

Before you begin

You need the number that was used to park the call.

Procedure

Step 1 Dial *66 + the parking spot the call was placed in and press Answer/Send

Step 2 You are now connected with the caller in that parking slot #.

Forward Calls

You can forward incoming calls from your phone to another number.

Enable Call Forward – All Calls

Procedure

Step 1 Lift the receiver and listen for dial tone.

Step 2 Press *72 or Forward softkey.

Step 3 When prompted, enter your PIN.

Step 4 Press 1.

Step 5 When prompted, enter the destination phone number, starting with a 1, i.e. 1 800 555 1212.

Disable Call Forward – All Calls

Procedure

Step 1 Lift the receiver and listen for dial tone.

Step 2 Press *72 or Forward softkey.

Step 3 When prompted, enter your PIN.

Step 4 Press 2.

21 |

P a g e

Cisco IP DECT 6825 Series User Guide